Summer is the season for air conditioners, but it’s also the time when your AC unit may break down often. It’s pointless to call an air conditioning service center every time your air conditioner breaks down. Several frequent problems may be readily resolved with a bit of troubleshooting. However, if you believe your air conditioner has a serious issue, call us today.

Having Issues With Your Air Filters

The air filters in your HVAC system are readily cleanable and replaceable components. Air filters are an essential part of an air conditioner since they are the protective layer that keeps pollutants like dust out of your home. These filters, therefore, are also the components that are most readily destroyed.

The air filters might be vacuumed or washed with a hose on your own. Several contemporary air conditioner models provide an auto-clean option for air filters. You may utilize that option if your air conditioner has it.

Taking A Look At The Air Vents

A blockage in the air vents might result in poor airflow. Inspect the air vents in your air conditioning system to confirm this. There’s a reasonable probability that the vents will be clogged with dust, grime, and other debris.

You may clean the vent by removing it and scrubbing it well. Wash the vents if you think there are still small particles obstructing them. If you notice that the airflow isn’t correct even when the vents are open, there might be an issue with the inner ducts. You may get this rectified by calling a professional from an AC service in Orlando FL.

The Circuit Breaker Tripped

Do you have trouble turning on your air conditioner? The circuit breaker might be to blame. When the circuit breaker detects an overload of electricity, the fuse in the circuit breaker will blow, protecting your air conditioner from harm. This also indicates that the circuit is broken, and the device will be powerless.

Check to see whether the circuit breaker has tripped in your fuse box. If this is the case, turn on the light and restart your air conditioner. Find our specialist from an air conditioning repair in Orlando, FL, if there is no impact.

Keep An Eye on Your Thermostat

Turn to your thermostat after you’ve determined that there’s no problem with your air conditioner. The issue might be as easy as this: the temperature settings may have been changed without your knowledge. Examine your thermostat and make any necessary adjustments.

If the issue with cooling persists, try reducing the temperature in your thermostat even more. If it still doesn’t work, make an appointment with our specialist to have your air conditioner serviced.

As you can see, an air conditioning troubleshooting technique may help you prevent a variety of problems. Suppose you remember just one thing from an air conditioning troubleshooting session. In that case, it should be that proper maintenance is the most effective approach to prevent problems and inconveniences for you and your neighbors.

Though air conditioning troubleshooting is essential to the optimal operation of your system, the most frequent air conditioning difficulties may be prevented by following a regular maintenance AC repair in Orlando, FL. Just visit our official website or call us at (321) 663-2665.

The Open High Limit in a Goodman furnace shows the negligence that has been done, which has led to the furnace setting on the self mode. You can reset the Furnace by clearing the code and reconnecting the power.

The primary role of a high limit is to protect the burner from getting over-heated that can cause damage to the whole burner. This high-temperature switch is a small device inside the Furnace but has an essential role in the functioning of the Furnace.

Three Situations Can Arise in The Case of Open High Limit

• The repetitive high limit can get your Furnace stuck open.
• Open High Limit can also get the Furnace locked out on safety.
• The bimetal can also get stuck because of the Open High limit.

What Can You Do on Your Own To Reset The Furnace?

• When your Furnace gets stuck open, all you need to do is turn the power off and slowly tap on the surface of the cabinet area of the Furnace after removing the limit.
• In case the bimetal of the Furnace is stuck, gently tapping on the cabinet helps fix the issue of a high open limit.
• Check the filter because there is a possibility that the filter is clogged which has led to the high open limit of the Furnace.
• Try to rectify the over heater temperature condition, including dirty evaporator coil, supply that got closed, blocked venting of airflow, and many other common causes.

These standard checks will help you understand the issue with the Goodman Furnace.

The Importance of Limit Switches in The Goodman Furnace

The limit switch protects the Furnace automatically while overheating, whereas a fault might appear when the limit switch is not working in a specified period required to switch off the burner in case of overheating. Some of the functions of a high limit switch in a Goodman Furnace are as follows –

• Controls The Main Blower of The Furnace

Modern furnaces like Goodman Furnace always consider the central blower as the Furnace’s security feature, which provides the burner with heat. The blower controls the heat, whereas the open high limit ensures the amount of heat that should not exceed during the use of the Furnace.

• Controlling Heat of The Burner

When the heat gets out of control, it can result in considerable damage, making open high limit a necessity inside the Furnace. It is possible for you to get the heating replacement in Orlando, FL easily compared to any other replacement center.

For all the reasons stated above, maintenance plays an important role even when replacing the Furnace. Therefore, heating replacement in Orlando, FL, will help you get through this process.

You can visit vaneddies.com/ for any further assistance and get your furnace repaired without putting in any extra effort. However, the significant factor for any furnace to function correctly is frequent maintenance and care. You can book your appointment in the nearest furnace maintenance in Orlando, FL.

Are you tired of your Goodman Furnace that keeps turning on and off? If yes, you need not worry much about it because it is a common problem faced by the customers because of a few minor reasons that need to be kept in mind while operating the Furnace.

You need to get it repaired quickly after checking a few things, which will not make you spend much on utility bills. The Furnace might have minor defects in the motor or flame sensor, which can be easily repaired.

Your Goodman Furnace can turn on and off because of the following reasons –

• Flame Sensor

The function of the flame sensor is to detect the flame, which, if damaged, will fail to notice the flame leading to the shutting off of voltage to the gas valve by the control board to stop the Goodman Furnace from heating.

You can get it repaired by heating service Orlando, FL, at minimal costs.

• Control Board
  

The control board is the Furnace’s brain, which supplies power to every part of the Furnace, which needs the energy to start or function. A defective control board can make your Goodman Furnace turn off and on.

• Draft Inducer Motor
  

The motor gets air exchanged into heat, leading to the exhaustion of flue. The pressure switch in the draft inducer motor shifts the signal of airflow.

A damaged Draft Inducer Motor can also cause problems in the turning on and off of the Furnace. The heating repair Orlando, FL, can solve your problem quickly when you visit them.

• Pressure Switch
  

The pressure switch in the Furnace helps to maintain the heat by switching off the Furnace when the heat is sufficient and has proper airflow, but if the pressure switch of the Furnace is not working, it might confuse with the turning on and off of the Goodman Furnace.

• Flame Rollout Limit Switch
  

The limit switch monitors the surrounding of the burners and detects the heat if any.

The “flame rollout limit switch” will turn off the burner if the motor cannot catch enough heat or the Furnace cannot vent out the heat properly. The heating service in Orlando, FL, will help you to get this switch fixed in no time.

• Reduced Air Flow
  

Suppose you haven’t changed your air filter in a while, the filters might get clogged and dirty, retaining all the heat that gets exchanged, leading to the overheating of filters.

You are supposed to change the air filters every 90 days. The reduction in the airflow can be because of clogged air supply vents and the blower wheel of the filter.

You can visit our website vaneddies.com/ to get the Goodman furnace repaired whenever you feel it is getting turned off and on. This is a prevalent problem that will not make you spend much on the repairs. Van Eddies Heating and Air will help you get to the root cause of the furnace defect, helping you fix it as soon as possible.

There have been numerous inquiries about air conditioners, like can the air conditioners filter out the smoke and smog? Unfortunately, most air conditioners do not get engineered to filter smoke or pollution, but certain air conditioning air filters can help. Also, to keep pollution levels low at your place, you can contact a professional for AC service in Orlando, FL, and consult with them about different air filters.

Can Air Conditioning Systems Filter Smoke?

When it comes to smoke, the built-in dust filters in an AC won’t help much. However, you can reduce the smoke impact at your place by following the tips mentioned below.

• Regularly clean and change the AC air filters

The indoor unit of every air conditioner has a dust filtration system. It accumulates dust from the air as it passes through, preventing it from blocking up the internal mechanisms. Hence, you must follow the instructions for information on how to get to the filters and how often they must get cleaned.

Clean filters help your air conditioning system run more smoothly and efficiently by allowing for easier air circulation. Or, you can also contact a professional for repair or AC replacement in Orlando, FL, to get the job done.

• Reduced smoke concentration by using ionization filters

Some air conditioners have an ionization-based air purification filtration system. Photoelectrocatalytic and plasma stream filters are two examples of this type of filter. Although ionization filters can remove some smoke, their assertions usually focus on the expulsion of dust particles, toxins, pathogens, and germs.

• Purchasing an aftermarket air-purifying filtration system comes with a risk

A quick search of the internet reveals a variety of aftermarket air-purifying filtration systems for air conditioners are labeled as electromagnetic, activated carbon, or something similar. They claim to be compliant with prominent air conditioning brands and can be cut into small to fit various models in some cases.

• For smoke, HEPA filters are still the best alternative

A HEPA filter (high-efficiency particulate air) is the easiest way of filtering out smaller particles like smoke. HEPA filters are available in many air purifiers and most water purifier units, but not in air conditioning units. Because of the density of the filters, HEPA filters are only effective at low circulation levels. As a result, they can’t get used in residential split-system or ductless air conditioners, which must frequently produce considerably more airflow than a specialized air purifier.

Residential air conditioners with a complete HEPA filtration may come in the future if a substantial redesign takes place in the HVAC world. Also, many manufacturers make split-system versions that include “Bio-HEPA” filters and an ion filter.

Are you looking for a reliable HVAC professional for repair, maintenance, or AC installation in Orlando, FL? Get in touch with Van Eddies Heating and Air Conditioning without wasting any time for expert services. To book a service session, you can call us at (321) 663-2665.

Maintaining an air conditioner is critical for your family’s health and comfort, and it’s simple to do with frequent AC maintenance. Thus, it is always advisable to contact a professional for air conditioning repair in Orlando, FL, to get your machine checked.

Signs That Your Machine Needs Replacement

Given below are some signs which tell you when your machine needs a replacement:

• Hot air coming out from the air conditioning unit

The purpose of an air conditioning unit is to keep your family cool and comfortable during the hot and humid weather months.

Also, You need an air conditioning unit the most during the hotter months of the year. If it continues to fail to blow out refreshingly cold air even after you get it repaired, it is time that you plan for system replacement.

• The thermostat for air conditioning is not working

The thermostat on your air conditioning unit serves as the device’s control room. The thermostat interacts with the air conditioner, telling it how much cold air it needs to produce. It also takes preventive measures to ensure that it is doing its task correctly.

If your air conditioner runs for short periods before shutting off, or won’t turn on anyway, or the thermostat is incapable of determining whether the device is turned on or off, go for AC replacement.

• Ducts blow out less air

The issue with weak air circulation is similar to the situation with hot air. When you turn on your air conditioning unit, you may feel colder air, but it is coming out very feebly, making it nearly impossible to distribute through the room.

It is probably a sign of a deteriorating compressor, but it could also indicate a duct problem. Because of the ambiguity of this problem, it’s best to call an AC repair Orlando, FL technician for a tune-up or replacement.

• Water seepage around the condenser

Moisture leaking into or near your air conditioner is a serious issue and could be a sign of a coolant leak. In less critical situations, the moisture could be from a fractured or obstructed tube that collects condensation. This issue could manifest itself in a variety of ways.

Water may seep from the air conditioning system in some cases, while ice may form inside your AC unit on the metal coolant lines located outside of the condenser in others. Both these cases are a red flag that you should contact a heating and air conditioning professional for a system replacement. If you are experiencing any of these signs, call us for replacement or air conditioning repair in Orlando, FL.

Looking for dependable HVAC experts in Florida? Look no further than Van Eddie’s Heating and Air conditioning. To book our expert services, call us at (321) 663-2665.

Owning an AC in Orlando is one of the best ways to fight against the extreme summer heat. It allows you to remain in the comfort of your cooled-down home without having to worry. However, this is only possible if the system isn’t worn out.

During an AC installation in Orlando, FL, spring is suggested as the best time to have your cooling system serviced annually. This period allows you to be prepared for the summer and ensures that your system is in good condition.

What Is Included In An AC Service?

Before scheduling an AC service in Orlando, FL, it is always good to be aware of what is included in the service.

• Cleaning the system’s evaporator and condenser coils.
• Cleaning and adjusting of the blower parts to help increase proper airflow.
• Cleaning or changing or the air filters to prevent restriction on airflow.
• Checking the aluminum fins that are located behind the unit and fixing them if necessary.
• Inspecting the internal parts of the system for any damages that may have occurred.
• Checking and recharging the refrigerant.
• Fixing and sealing any leaks that may have appeared.
• Tightening and fixing of wires that may have come loose or are damaged.
• Lubricating the system’s moving parts to prevent them from jamming.
• Checking that the thermostat’s settings are accurate

Why Is Spring The Best Time For An AC Service In Orlando?

Here are a few reasons why spring is the best period to have your cooling system serviced in Orlando:

• Be Ready For Summer

An AC unit, when not in use, collects dust and pollen. This is often because people tend to need their system only once a year. Scheduling an AC service in Orlando, FL, in spring allows you to be prepared and confident that your system is in perfect condition.

• Avoid Delays

One of the busiest times for any AC technician is during summer. This makes it impossible to receive help within the same day. This is because of its continuous use. In such cases, there is a high possibility of the system wearing out faster or breaking down, especially if it has not been serviced.

• Improve Indoor Air Quality

Late spring and summer is the time where seasonal allergies come into play. Servicing your system during spring helps to improve the air quality of your home. This reduces the chances of springtime allergies. However, if the system still can’t do so, it is time to consider an AC replacement in Orlando, FL.

• Extends System’s Lifespan

Servicing your system right before summer helps extend the system’s lifespan as it allows it to be more efficient in time for summer. This also helps reduce your utility bill. This also pushes the need for you to schedule an AC installation in Orlando, FL, till the system reaches the end of its lifespan.

If you are looking to save money, you can schedule an AC replacement in Orlando, FL at a reasonable price by calling us at (321) 663-2665.

When you own an HVAC system, there are few factors to keep in mind. One of them includes the condition of your system. This will not only increase the lifespan of your system but also creates a comfortable environment for you.

Ensuring that your HVAC systems are in proper working order is the first step. By being aware of the signs, you can schedule an air conditioning repair in Orlando, FL, to prevent your system from breaking down. This also helps you save on extra costs and avoids any decline in its efficiency.

When Is It Time To Call For An AC Repair?

Certain indicators that your system shows suggest it is time to call for a repair. Some of the frequent ones that are found in a commercial space are:

1. Spike In Utility Expense

When you notice a sudden spike in your utility bill, regardless of the present heatwave, it is time to call for an AC repair in Orlando, Fl. This sudden spike is often related to the system malfunctioning due to dirty air filters, overuse, or even a refrigerant leak.

Considering that most commercial businesses own a central cooling system, this means that every room becomes affected. Apart from this, these malfunctions can also cause the system to expire early due to more frequent wear and tear.

2. Strange Smells Coming Out Of The Vents

Another major sign that suggests you need a commercial AC repair is weird smells coming from the vents.

• Musty Odor: This is a major indicator that mold and mildew are growing inside your system. Considering this is harmful to one’s health, it is important to have it checked out immediately.
• Burnt Or Acid Smell: Burning or chemical smells suggest that some wires may be burning or the system is short-circuiting and overheating.

 3. Short Cycling And Temperature Imbalance

An imbalance in temperature often results in cold and hot spots appearing around the room. The system’s short cycling usually causes this. Short cycling is when the system runs for a little while, switches off, and starts repeatedly.

This could be due to a faulty thermostat that is giving the system wrong directions, or the system is malfunctioning. In this case, the best thing to do is call for an air conditioning repair in Orlando, Fl.

   4. Strange Noises From The System

While it is common for an AC unit to make operating noises, strange sounds suggest an internal issue with the system.

• Rattling Noises: This indicates that internal parts have come loose and are hitting against each other.
• Clanking Sounds: This is another indicator of loose parts or a problem with the motor fan blades.
• Screeching Noises: These sounds signify that some of your internal parts are jammed and are having trouble moving.

If you are looking for an AC repair in Orlando, FL, get in contact with us to get the best services possible!

One of the most important components of an air conditioner that is placed during an AC installation in Orlando, FL, is the thermostat. The thermostat regulates the air conditioning to a person’s preferred temperature during the summer and winter. Many individuals prefer to keep it at the same temperature all year, while others prefer to adjust it according to the weather, time of day, and season. However, there is no right or wrong way to control the thermostat.

Advantages Of A Constant AC Temperature

There isn’t that much of an advantage to keeping the AC at a constant temperature except for convenience’s sake. The constant temperature also allows your system to run at one pace. This makes an AC service in Orlando, FL easier to do as the system would be operating with lesser fluctuations.

Disadvantages Of A Constant AC Temperature

Setting the thermostat to a constant temperature has the main disadvantage of increasing heat energy loss. To balance itself out, heat energy tends to travel from a spot where there is more of it to a place where there isn’t.

When your thermostat is set to a high temperature all of the time, your home will eventually become warmer than the outside temperature. So to balance it out, heat energy will start leaking outside, causing a person to run their system for longer to maintain the heat level. This turns into a cycle that can cause a person to believe their system is faulty, thus scheduling an AC replacement in Orlando, FL.

The Best Way To Control Your Thermostat

The best way to effectively use your thermostat as well as avoid the need for an AC replacement in Orlando, FL, is to follow the 8-hour routine. In simple terms, it means to have your thermostat set at a higher temperature when you leave home and set it at a lower temperature that is as close to the outside temperature when you get home. This not only helps to reduce your utility bill but also reduces the amount of heat energy that is being leaked outside.

Invest In A Smart Thermostat

During an AC installation in Orlando, FL, a person is often advised on the benefits of investing in a smart thermostat. These devices allow a person to program the temperature to remain constant or change at a particular time and to what temperature. This way, a person doesn’t have to continuously worry about having to change their system’s thermostat setting each day.

So, is it better to keep your AC at one temperature? The answer depends on your needs. However, it is always advisable to go for a timer-based temperature setting to avoid heat loss. Finally, make sure to get your AC unit regularly serviced with the best AC service in Orlando, FL. If you are on the lookout for such a service, look no further than Van Eddies Heating & Air. Avail top quality and affordable today by calling us at (321)-663-2665 or email us at [email protected].

During hot summers, the air conditioner might take a longer time to cool the room with warmer temperatures utilizing more energy. The time your air conditioner takes to cool the room depends on many factors like the size of your home insulation is done to the attic, the outside temperature, and so on.

It takes approximately 3 hours for an optimal functioning air conditioner to cool a 4-bedroom house by 10⁰ Fahrenheit. Apart from this, the air conditioner’s cooling power depends on factors like its age, size, and power. AC repair companies in Orlando, FL, will check your air conditioner for malfunctioning components and provide services accordingly.

How To Increase The Cooling of Your House?

If you are continuously operating your air conditioner, there are chances it might fail to reach the set temperature. If the air conditioner is unable to cool the room efficiently, you can try the following tips before calling in a professional:

• Clogged Air Filter

An air filter is present in or around the indoor air handling unit. Check if it is clogged with dirt or debris. It prevents the free flow of air through the AC unit and prevents effective cooling of the room.

Air filters are readily available at home provision stores, and the technicians change the air filters for low costs. Professionals advise that you should check the air filters of the AC unit once every month. A house having smoke or pets should get the air filters changed regularly.

• Inappropriately Placed Thermostat

Consider checking the thermostat settings if it gets hotter than usual with the air conditioner working. Ensure that the thermostat is set to cool and if it is, then check its temperature setting. If it was turned off unknowingly, set the thermostat to heat or constant fan, and set it back to cooling operation.

• Leaky Air Ducts

Check the air ducts for any damage. 20-30% of the time, it is seen that the ducts of an air conditioner leak, causing the conditioned air to escape into basements, walls, etc.

• Low Refrigerant Levels

Call a professional to check on the refrigerant levels of your AC. A refrigerant is the most vital component for the cooling process. It passes from the indoor coil of the system to the outdoor, converting from liquid to gaseous. The refrigerant removes heat from the room and allows the conditioned air to cool the temperature. If the refrigerant levels are low, the air conditioner will be unable to draw out the heat.

• Undersized Air Conditioner

Have a professional check on the size of your air conditioner. The size of an air conditioner should be corresponding to the size of your house. If the AC is small, it will take up lots of energy running continually, producing poor results. You can consider adding a ductless unit to cool the ‘hot spots.

If you wish to get your air conditioner checked, look for air conditioning repair in Orlando, FL, or AC repair in Orlando, FL. We at Van Eddie’s provide state-of-art services for your air conditioner, be it maintenance or tuning up. Our skilled technicians will ensure that your air conditioner is in an optimal state.